WITH RISER

The Shamrock Brush Rake with riser is designed for the contractor with minor volumes ofbrush removal from job sites. It works well for brush piling, scarifying and brush and undergrowth removal. It is not recommended for heavy land clearing, such as stumps, trees, and rocks.

The rake front is mounted to the top of the moldboard by the use of two weld-on brackets which pin the thrust arms to the blade allowing the rake to swing out, clearing itself of debris. Once these brackets are installed, one man can attach or remove the front in a matter of minutes.

Shamrock Brush Rakes feature heavy duty construction for long life, rectangular tubing vertical pickets for high strength and increased torsional resistance to uneven tooth loads, abrasion resistant teeth for long life and low maintenance costs, standard spillguard to keep debris from radiator. The standard sizes and adjustable lug spacing allows fit up to many machines within size groups.

MODEL NO.	TRAC. HP	RAKE WIDTH	TOOTH LGTH.	TOOTH SPACING	# OF TEETH	TOOTH THICK.	APPOX. WEIGHT
BRR25	50-65	77.5	11.75	15.25	6	1.25	610
BRR30	65-84	84	15.5	16.8	6	1.5	870
BRR35	85-115	92	15.5	15.3	7	1.5	1,100
BRR40	116-135	108	16.75	15.5	8	1.75	1,550
BRR45	136-155	108	16.75	15.5	8	1.75	1,650
BRR50	156-175	108	18.75	15.5	8	2.0	2,200
BRR55	176-210	108	18.75	15.5	8	2.25	2,490
BRR60	211-260	120	20.5	15.0	9	2.25	3,040
BRR65	261-320	120	20.5	15.0	9	2.5	3,400
BRR70	321-430	120	20.5	17.5	9	3.0	4,500